Table of Contents
Advertisement
Configuration
Maintenance
System
Choose Maintenance > System. The page shown in the right figure appears. In this
page you can reboot your router or save your router configuration to a file on your
computer in case you have to reset your router to factory default settings. You can
restore your router settings from a previously saved configuration file.
You may also reset your router to factory default settings. Resetting your router to
factory default settings will delete your current configuration.
Configure the parameters in this page as described below.
Reset to default: This option restores all configuration settings back to the settings
that were in effect at the time the router was shipped from the factory. All settings will
be lost. If you want to save your router configuration settings, use the Backup
Settings option below.
Save and reboot: This will save all your settings and restart the router.
Back settings: Save your configurations in a file on your computer so that it may be
accessed again later if your current settings are changed. Be sure to save the
configuration before performing a firmware update.
Update settings: Click Browse to select the configuration file of device and click
Update Settings to begin restoring the device configuration.
Note:
Do not turn off your device or press the Reset button while an operation in this page is in
progress.
D-Link DSL-526E User Manual
69
Advertisement
Table of Contents
