Step 2: Setting The Time - Sony lbt-g2500 Operating Instruction

Step 2: Setting the
time
You must set the time before using the timer
functions.
You can set the time while the power is off.
For European models, the clock is on a
24-hour system.
For other models, the clock is on a 12-hour
(AM/PM) system.
The 24-hour system model is used for
illustration purpose.
1
DISPLAY/DEMO
1
Press t/CLOCK SET.
The hour indication flashes.
2
Press TUNING +/– to set the hour.
6
3,5 2,4
STEP
KHz
MHz
3
Press ENTER/NEXT.
The minutes indication flashes.
4
Press TUNING +/– to set the
minutes.
5
Press ENTER/NEXT.
The clock starts working.
To change the preset time
You can also change the time while the power
is on.
1 Press t/CLOCK SET.
2 Press TUNING +/– repeatedly until
"SET CLOCK" appears, then press
ENTER/NEXT.
3 Repeat steps 2 to 5 in "Setting the time".
Tips
• If you've made a mistake, start over from step 1.
• Setting the time deactivates the demonstration
mode.
If you want to display the demonstration mode,
press DISPLAY/DEMO when the power is off.
STEP
KHz
MHz
STEP
KHz
MHz