Sony lbt-g2500 Operating Instruction page 5

2
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Jack type A
AM loop antenna
Jack type B
AM loop antenna Extend the FM lead
antenna horizontally.
3
Set VOLTAGE SELECTOR to the
position of your local power line
voltage (for models with a voltage
selector).
VOLTAGE SELECTOR
110V–120V
Extend the FM lead
antenna horizontally.
A M
F M
7 5 O
H M
A M
F M
7 5 O
H M
220V–240V
4
Connect the power cord to a wall
outlet.
The demonstration appears in the
display.
5
Deactivate the demonstration mode
by pressing DISPLAY/DEMO while
the system is off.
The demonstration mode is also
deactivated when you set the time.
Inserting two size AAA (R03)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
5