Samsung SCX-6545N Service Manual page 174

4.1.6.7 Authentication
This feature lets you control and lock all outgoing data, or change the password.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter password and press OK.
3. Press the Setup tab > Authentication.
Option
Authentication Network
Mode Accounting
Foreign Device
Interface
Authentication Foreign Device
Mode (Continue) Interface
(Continue)
No
Authentication
Mode
Change Admin. Password
Service Manual
Alignment & Troubleshooting
It enables the authentication mode which can be used for Job
Accounting Plug-in the SyncThru™ Web Admin Service.
When you install the optional FDI kit, select Foreign Device
Interface Configuration Setup to activate it.
• Job Timer: If there is not enough credit, you can set the machine to
cancel a job right away or wait a designated amount of time for a
deposit.
• Print Job Control: When it is enabled, the both computer printing and
copying are possible since the credit remains. With Disable, only the
copy printing job needs the credit. (which means a computer printing
a report or a fax job needs no credits)
• Inhibit Services: When no credit is left, the machine disables the
copy job only with Copy Only. With All Services, scanning service
and copy job are disabled.
• Internal Credits: It is used when you cancel the job or when the
job is cancelled by the device due to insufficient credits (coin) or
is canceled by user's request. If you select Enable, the machine
deposits a credit equal to the number of sheets that did not print out
correctly, then it prints next job for free (for the amount deposited).
With Disable, even if you cancel the printing job, the machine
includes jammed paper in the count and the cost of printing.
• Image Counter: Depends on whether the machine counts blank
white pages.
It disables Authentication Mode.
You can change the password for the Admin Setting authentication.
4-50
Description
Samsung Electronics