Status Led - Samsung SCX-6545N Service Manual

■ Status LED

When the problem occurs, the Status LED indicates the machine's condition by the light color of it's action.
Status
Off
Green Blinking
On
Red Blinking
ED or LED button
Status (LED) On
Power Saver (LED
button)
Interrupt (LED button)
Service Manual
Alignment & Troubleshooting
Description
• The machine is off-line.
• The machine is in power save mode. When data is received, or any
button is pressed, it switches to on-line automatically.
• When the backlight slowly blinks, the machine is receiving data from the
computer.
• When the backlight blinks rapidly, the machine is printing data.
The machine is on-line and can be used.
• A minor error has occurred and the machine is waiting the error to be
cleared. Check the display message. When the problem is cleared, the
machine resumes.
• The toner cartridge is low. Order a new toner cartridge. You can
temporarily improve print quality by redistributing the toner.
LED status
Off • The imaging unit is totally out of lifespan.
Remove the old imaging unit and install a new one.
Green On
• The toner cartridge is totally empty. Remove the old toner cartridge and
install a new one.
Green Blink
• A paper jam has occurred.
• The cover is opened. Close the cover.
• There is no paper in the tray. Load paper in the tray.
• The machine has stopped due to a major error. Check the display
message.
Red On
Red Blink
Blue Off
Blue On
Blue Off
Blue On
4-16
Description
Power Off
Ready
. Copy Mode : Copy job is in progress
. Fax Mode : Fax job (RX, TX) is in progress
. Scan / Email : Scan or Email job is in
progress
. Printing:
- Slow Blinking : Data processing
- Fast Blinking : Engine is printing
Errors that need user's intervention such as
paper jam, toner empty, tray empty, cover
open
Recoverable errors that user's intervention is
not needed to recover happens such as paper
mismatching.
The machine is in the warning status such as
end of consumables.
The machine is not in power saver mode
The machine is in power saver mode
The machine is not in interrupt printing mode
Then machine is in interrupt printing mode
Samsung Electronics