NEC P401 Installation And Assembly Manual page 2

Install the PerfectAlign™ Video Wall Brackets*
1
Please refer to the Installation Instructions provided by Digital Factory Digital Media Solutions. A 2x2 Video Wall
set up requires a total of four PerfectAlign™ Video Wall Brackets.
Mount the Displays
2
Please refer to the Installation Instructions provided by Digital Factory Digital Media Solutions.
Note: Power and signal should be present at the wall or load bearing structure prior to hanging the
Displays. Each display should be connected to power and signal prior to placing each on the bracket.
Use of an Isobar6 surge suppressor is highly recommended to prevent damage on the Displays and system
crashes. A minimum of two technicians should be utilized for Display mounting, three is recommended.
Prepare all NEC Displays for mounting by installing the Display mounting screws (with washer stack ups)
provided by Digital Factory. The screws are placed on the inside ten (10) mounting holes matching the
PerfectAlign™ bracket.
1