Scanning Images Using The Toshiba E-Studio Wia Driver - Toshiba e-STUDIO455 Series Scanning Manual

Scanning Images Using the TOSHIBA e-STUDIO WIA Driver

The Client Utilities CD-ROM also includes the TOSHIBA e-STUDIO WIA Driver for users of Windows XP/Vista/Server
2003/Server 2008. This driver can be used together with a WIA-compliant application, such as Microsoft Paint supported
by Windows XP or Windows Vista, to scan images on the equipment and load them to your client computer.
If the User Authentication and the Department Management features are enabled, the WIA Scan Driver cannot be
operated from a client computer. To operate them from a client computer, disable the User Authentication and the
Department Management feature.
Originals
For instructions on how to install the driver, refer to the Software Installation Guide. For instructions on how to scan and
acquire images to your computer, refer to the documentation that comes with your WIA-compliant application.
If you are using Windows XP or Windows Server 2003, follow the procedure below to register this equipment to the
TOSHIBA e-STUDIO WIA Driver after the installation of the driver.
1. Double-click [Scanners and Cameras] of [Control Panel].
2. Right-click [TOSHIBA e-STUDIO WIA Driver] and then click [Properties].
3. Click [Discover] on the [Device Setting] tab menu.
4. Click [Start Discovery].
5. Select this equipment and then click [OK].
6. Click [OK].
Connecting over TCP/IP Network
Scan originals using
the TOSHIBA e-STUDIO WIA Driver
Import your scans to
a WIA-compliant application
Scanning Images Using the TOSHIBA e-STUDIO WIA Driver
5 OTHER SCANNING METHODS
Windows XP
Windows Vista
Windows Server 2003
Windows Server 2008
81