Remote Controller - Panasonic NV-SJ260 Series Operating Instructions Manual

Panasonic operating instructions video cassette recorder nv-sj260
Table of Contents

Advertisement

To Stop Playback Automatically
(Playback Off Timer Function)
If you set the playback duration, the playback will stop
automatically.
After the set playback time has elapsed, the VCR
automatically stops playback and switches off.
To Activate the Playback Off Timer Function:
During normal playback, press the Play button
for more than 2 seconds to put the VCR in the Playback Off
Timer mode.
After that, press the Play button
until the desired playback duration is displayed on the VCR
display.
≥ Repeatedly pressing this button changes the indication in
the following order:
Counter display
(normal playback mode)
240
(min.)
To Stop Midway:
Press the Stop button
To Play Back NTSC Video Cassettes on
Your PAL TV
(Quasi-NTSC Playback Function)
This VCR allows playback of tapes recorded in the NTSC
system on a normal PAL system TV with the same operations
as usual.
On some TVs, however, the playback picture may roll up or
down.
≥ If your TV has a V-HOLD control or equivalent adjustment
function, use it to try to stop the picture movement.
14
on the VCR
on the VCR repeatedly
30
60
(min.)
(min.)
180
120
(min.)
(min.)
.
Convenient Automatic Functions
VCR Auto Power On
When you insert a video cassette, the VCR switches on
automatically.
Auto Playback Start
When you insert a video cassette with a broken erasure
prevention tab, playback start automatically without having to
press the Play button
.
VCR-off Playback
When the VCR is off, an inserted cassette can be played
back by pressing the Play button
Auto Rewind
When the tape reaches the end, the VCR automatically
rewinds it to the beginning.
≥ This function does not work during timer recording and
OTR.
Automatic Switching Off and Ejection
When the VCR is switched off, and inserted cassette can be
ejected simply by pressing the EJECT button
will eject the cassette and automatically turn itself off again.
VCR-off Search
When the VCR is off, the VCR starts intro-jet scan of an
inserted cassette by pressing the SEARCH button
To Eject the Video Cassette Using the

Remote Controller

Keep pressing Stop button
.
. The VCR
.
for at least 3 seconds.

Advertisement

Table of Contents
loading

Table of Contents