Summary of Contents for Newton Waterproofing Victron MultiPlus 12/3000/120
- Page 1 System Sump and Pump VICTRON MULTIPLUS Installation Manual - 12/3000/120 NEWTON SYSTEM 500 Advanced Battery Back-Up System Rev 2.0 - 29 April 2016 © Newton Waterproofing Systems...
- Page 2 Limited Product Warranties. 2-year limited product warranty from date on delivery note or invoice to the customer. WHAT IS COVERED BY THIS LIMITED HARDWARE WARRANTY? This limited warranty covers replacement (Newton Waterproofing Systems) only for defects in materials and workmanship. WHAT IS NOT COVERED BY THIS LIMITED HARDWARE WARRANTY? •...
-
Page 3: Table Of Contents
CONTENTS PAGE INFORMATION DIMENSIONS SAFETY INSTRUCTIONS INVERTER SIZING TYPICAL DETAILS INSTALLATION QUICK INSTALL GUIDE OPTIONAL CONNECTIONS CONFIGURATION BATTERY SELECTION OPERATION MAINTENANCE TECHNICAL DATA TROUBLESHOOTING Call us for more information on +44 (0)1732 360095... -
Page 4: Information
Before applying power, ensure that the available power source matches the configuration settings of the product. This manual is to be used with the Victron MultiPlus 12/3000/120. 12/xxxx/xxx denotes the charging volts - use with 12V batteries only. xx/3000/xx denotes the AC output capacity in VA. xx/xxxx/120 denotes the charging current in Ah. -
Page 5: Inverter Sizing
Batt NOTE: This is a waterproofing detail. For the design of the structure, please use a professional designer. We strongly recommend that Newton waterproofing systems are installed by our NSBC registered contractors who will guarantee, insure and accept liability for both the design and the installation of our systems Please refer to product data sheets before installation of our products. John Newton reserves the right to update drawings. -
Page 6: Installation
Titan-P System NOTE: This is a waterproofing detail. For the design of the structure, please use a professional designer. We strongly recommend that Newton waterproofing systems are installed by our NSBC registered contractors who will guarantee, 500 wa insure and accept liability for both the design and the installation of our systems Please refer to product data sheets before installation of our products. John Newton reserves the right to update drawings. - Page 7 CP750/NP750/SP750 Cutter NOTE: This is a waterproofing detail. For the design of the structure, please use a professional designer. We strongly recommend that Newton waterproofing systems are installed by our NSBC registered contractors who will guarantee, insure and accept liability for both the design and the installation of our systems Please refer to product data sheets before installation of our products. John Newton reserves the right to update drawings.
- Page 8 INSTALLATION FIXING TO THE WALL Fix the provided blue top fixing bracket to the wall via the 3 pre-drilled holes. Screws are provided. It is important to fix the bracket level. Attach the MultiPlus to the top support bracket using the lugs on the rear of the unit.
-
Page 9: Quick Install Guide
INSTALLATION AND QUICK INSTALL GUIDE CONNECTION OF THE AC CABLING This is a Safety Class I product (supplied with a protective grounding terminal). Uninterrupted protective grounding must be provided at the AC input and/or output terminals and/or chassis grounding point located externally on the product. -
Page 10: Optional Connections
On delivery, the MultiPlus is set to standard factory values ready for use as part of a Newton Pumping System with charging voltages set for the three batteries supplied by Newton Waterproofing Systems for use within power supplies of 230V input voltage and 50Hz frequency. Inverter output voltage is set to 230V AC. There is no need to change any of the default settings for use within the UK. -
Page 11: Operation
OPERATION AND MAINTENANCE OPERATION On/Off/Charger Only Switch For all operation as a battery back-up system the switch should be in the 'on' position, meaning the product is fully functional, powering the pumps with through power during times of normal power supply, and inverter power during a power outage. -
Page 12: Technical Data
All technical data is available on page 2 of the Data Sheet. TROUBLESHOOTING The table on page 12 provides a quick reference of the more common faults. Disconnect the battery(s) and pumping systems before diagnosing the fault. Consult Newton Waterproofing Systems if the fault cannot be resolved. Problem...