Table of Contents
Advertisement
INSTALLATION
FIXING TO THE WALL
Fix the provided blue top fixing bracket to the wall via the 3 pre-drilled holes. Screws are provided. It is
important to fix the bracket level. Attach the MultiPlus to the top support bracket using the lugs on the rear of
the unit. Complete the fix by screwing the bottom of the MultiPlus to the wall via the bottom 2 holes using the
screws provided. Carefully mark out the hole centres then take the MultiPlus off the wall to drill the holes.
Note: Rawl plugs will be required for the screws for certain wall types (not supplied).
CONNECTION OF BATTERY CABLES
1. Use an insulated box spanner in order to avoid shorting the battery. Avoid shorting the battery cables
2. Connect the battery cables: the + (red) and the - (black), to the battery. Reverse polarity connection (+ to –
and – to +) will cause damage to the product and will void the warranty
3. Secure the nuts tightly in order to reduce the contact resistance as much as possible
For more information visit us online www.newtonwaterproofing.co.uk
8
Advertisement
Table of Contents
