Before Requesting Service - Panasonic NV-HV50 Series Operating Instructions Manual

Before requesting service

Manual correction of a bad picture:
The display of the VCR
does not light up:
The display of the VCR is on
but the unit does not respond
to any input:
Noise from the transport
mechanism:
The automatic clock does not
set correctly:
28
If you notice interference or a shift of the picture during normal, still or slow motion
playback, press the TRACKING / V-LOCK b
Press + and - together to actuate automatic correction. Some video cassettes do not
support tracking control. This is not indicative of a malfunction.
Verify that the AC mains lead is properly attached.
Check your Power save se tting (page 23).
There is an active timer programme. Press the
The unit's transport mechanism produces some noise when winding the tape fast forward
or backward. This is not indicative of a malfunction.
Set Clock set to AUTO (page 9).
Set Time and Date manually if the unit does not find a station emitting the time signal.
Check your Power save setting (page 23).
utton towards + or - to correct the picture.
TIMER button to deactivate it.