Recording - Panasonic NV-HV50 Series Operating Instructions Manual

Recording

VCR
SP
VCR
SP
10
SV120 HV60 HV65 HV55 HV50 MV20 MV15
REC Set the TV set to the video channel and insert a cassette into the video recorder;
make sure that the cassette's protection tab is still in.
Select a channel to record from.
Select the AV channel if you are recording via the 21-pin scart cable.
Press REC
Press the Stop button
To pause recording:
The function will switch itself off after approx. 5 minutes to protect the video heads.
To resume recording:
Recordings in the S-VHS or S-VHS ET REC mode are supported by the PAL
TV system only. (Only SV120, page 23)
SV120 HV60 HV65 HV55 HV50 MV20 MV15
OSD/DISPLAY
Tape Remain counter/indicator
The display of the video recorder shows: time - counter - tape remain.
The start of a cassette is indicated as -----.
Press OSD/DISPLAY
SV120 HV60 HV65 HV55 HV50
SP/LP/EP
Prior to starting the recording session, press
SP : normal recording time
LP : double recording time
EP : triple recording time
When you play back LP or EP recordings, some cassettes (e.g.
may produce interference. This is not indicative of a malfunction.
to start recording.
to stop recording.
until ' RE' is displayed.
MV20 MV15
- optimal picture quality
- simple picture quality
- reduced picture quality
SP/LP/EP to set the tape speed.
E-300 type)