Simpleset® Programming; Factory Preprogramming - ICM Controls SC 3001 Installation, Operation & Application Manual

Simpleset ® programming is a convenient method of programming the thermostat. Once the entire Monday
(Day 1) schedule is set, Simpleset
After the complete Monday schedule is set (see Programming on Page 12), you are at the Day 2 screen:
1. Press the button once. Day 1 screen displays.
2. Press the button for 2 seconds.
• The days of the week will count down from 7 to 1 and this will lock the
settings into memory.
• Once the schedule is locked in, you can go through each day and make
any changes you require. This feature speeds up the programming of
the standard weekday/weekend schedule.
3. Slide Cool/Off/Heat switch to Heat or Cool to exit program mode.
Note: Press Mode switch to enter and exit program operation. PROG displays on screen when
following the program schedule.
The SC3001 comes preprogrammed with the following schedule:
MORN
MONDAY
thru
HEAT
SUNDAY
COOL

Simpleset® Programming
® programming will copy the Monday schedule to every day of the week.

Factory Preprogramming

:00 AM DAY
HEAT
70°F
COOL
78°F
:00 AM EVE
HEAT
62°F
COOL
85°F
:00 PM NITE
HEAT
70°F
COOL
78°F
0:00 PM
62°F
82°F