Simpleset® Programming; Factory Preprogramming - ICM Controls SC 3201 Installation, Operation & Application Manual

Simpleset ® programming is a convenient method of programming the thermostat. Once the entire Monday
(Day 1) schedule is set, Simpleset
After the complete Monday schedule is set (see Programming on Page 24), you are at the Day 2 screen:
1. Press the button once. Day 1 screen displays.
2. Press the button for 2 seconds.
• The days of the week will count down from 7 to 1 and this will lock the
settings into memory.
• Once the schedule is locked in, you can go through each day and make
any changes you require. This feature speeds up the programming of
the standard weekday/weekend schedule.
3. Slide the System switch to Heat or Cool to exit Programming Mode.
The SC3201 comes preprogrammed with the following schedule:
MORN
MONDAY
HEAT
thru
SUNDAY
COOL

Simpleset® Programming
® programming will copy the Monday schedule to every day of the week.

Factory Preprogramming

DAY
6:00 AM
HEAT
70°F
COOL
78°F
EVE
8:00 AM
HEAT
62°F
COOL
85°F
NITE
6:00 PM
HEAT
70°F
COOL
78°F
10:00 PM
62°F
82°F