Trolling Motor Transducer Installation; Trolling Motor Transducer Options - Humminbird HDR 610 Installation And Operation Manual

6. Weight the transducer so that it will not move while the epoxy is curing.
NOTE: When the epoxy cures, no water is necessary inside the hull.
7. If you unplugged the transducer cable at the beginning of this procedure, plug it
back into the depthsounder.
NOTE: Neither water, spilled gasoline, nor oil will affect the performance of the
transducer.

TROLLING MOTOR TRANSDUCER INSTALLATION

Several styles of the transducer are compatible with
trolling motor mounting. If you have a trolling motor
bracket, refer to the separate installation instructions
that are included with the bracket.

Trolling Motor Transducer Options

If you don't have a trolling motor transducer, there are several options:
• You may purchase a Trolling Motor Adapter kit that will allow you to mount the
transducer on the trolling motor.
• You may also exchange your NEW and UNASSEMBLED transducer (with mounting
hardware included) for a trolling motor transducer.
There are also several transducer switches available that support the following
configurations:
• Two depthsounders with one transducer or two transducers with one
depthsounder.
NOTE: Call the Humminbird® Customer Resource Center at 1-800-633-1468 for details
and pricing, or visit www.humminbird.com for more information.
23