Back Panel - Hyundai HLT-1711 Owner's Manual

You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below.
1
1
Aerial socket
1.Connect the RF out socket of the VCR to the aerial
socket of the set.
2.Connect the aerial cable to the RF aerial in socket of
the VCR.
3.Store the VCR channel on a desired programme num-
ber using the 'Manual programme tuning' section.
4.Select the programme number where the VCR channel
is stored.
5.Press the PLAY button on the VCR.
8
Watching VCR
< Back panel of the set >
- If you connect an S-VIDEO
- To avoid picture noise (inter-
VCR
1.Use the INPUT SELECT button on the remote control
2. Insert a video tape into the VCR and press the PLAY
2
2
< Back panel of the set >
VCR to the S-VIDEO input,
the picture quality is
improved ; compared to con-
necting a regular VCR to the
Video input.
If a 4:3 picture format is
used;the fixed imgae may
remain visible on the screen.
ference), leave an adequate
distance between the VCR
< Back panel of the VCR>
and set.
to select AV1 or AV2 .
(If connected to S-VIDEO, select the
source.)
button on the VCR.
(See VCR owner's manual)
A A V2 V2 S-VIDEO S-VIDEO ANT IN IN ANT
( )
S-VIDEO
OUT
(R) AUDIO (L) VIDEO
IN
SAV external input