Panasonic AG-DTL1 Operating Instructions Manual page 98

RS-232C
$ Query control commands
Data transmitted by PC
[STX] QSQ [ETX]
[STX] QST [ETX]
[STX] QSU [ETX]
[STX] QTA [ETX]
[STX] QTC [ETX]
[STX] QTL [ETX]
Data returned from unit in response
[STX] LSQm:t [ETX]
Parameter
m = 0—F: Camera No. 1—16
t = A: Auto sequence mode
M: Manual sequence mode
[STX] LSTdata1:data2 [ETX]
Parameter
data1 = ndmmtt (start date/time)
data2 = ndmmtt (end date/time)
n = 1: 1st week
2: 2nd week
3: 3rd week
4: 4th week
L: Last week
d = 0: Sunday
1: Monday
2: Tuesday
3: Wendnesday
4: Thursday
5: Friday
6: Saturday
mm = 01—12: Month
tt = 01—22: Hours
[STX] LSUm [ETX]
Parameter
m = N: Daylight saving time setting ON
F: Daylight saving time setting
OFF
[STX] TATmm:S [ETX]
Parameter
data = mm:n
mm = 00—23: Digits of hours to be set
FF: Sets minute digits to 00.
n = S (fixed)
[STX] TTSdata [ETX]
Parameter
data = hhmmss
hh = 00—23: Hours (24-hour mode)
mm = 00—59: Minutes
ss = 00—59: Seconds
[STX] TCSdata [ETX]
Parameter
data = yyyymmdd
yyyy = 2000—2099: Gregorian
calendar
mm= 01—12: Month
dd = 01—31: Day
98
Description of command
Queries the camera number selection and sequence mode.
Queries the start date/time and end date/time of daylight
saving time.
Queries the ON/OFF setting for daylight saving time.
Queries the setting of the time to be set when signals have
been input from the component connected to TIME ADJ IN
on the rear panel terminal section.
Queries the current time setting.
Queries the current date setting.