Panasonic AG-DTL1 Operating Instructions Manual page 87

RS-232C
$ Query control commands
Data transmitted by PC
[STX] QDP [ETX]
[STX] QDS [ETX]
[STX] QDW [ETX]
[STX] QDX [ETX]
[STX] QFS:nn [ETX]
Parameter
nn = 01—12: Free-set timer
number
[STX] QHI [ETX]
Data returned from unit in response
[STX] DPPmm [ETX]
Parameter
mm = C: Center
LB: Bottom left
LT: Top left
RB: Bottom right
RT: Top right
[STX] LDSm [ETX]
Parameter
m = I: Field playback
R: Frame playback
[STX] LDWm [ETX]
Parameter
m = W: WARNING
The control signals continue to
be output.
R: REC
The control signals are output
only during recording.
[STX] LDXm [ETX]
Parameter
m = V: VIDEO OUT
Video signal output connector
E: EXT SW IN
External sequential switcher
signal input connector
[STX] LFSnn:mmdd:p [ETX]
Parameter
nn = 00: Free-set timer is not set.
01—12: Free-set timer number
mm = 01—12: Month
dd = 01—31: Day
p = 0: Sunday
1: Monday
2: Tuesday
3: Wednesday
4: Thursday
5: Friday
6: Saturday
F: Power OFF throughout the day
[STX] HTIm [ETX]
Parameter
m = A: REWIND 5 REC
R: REC
S: STOP
87
Description of command
Queries the position where the characters are to be
displayed on the monitor screen.
Queries whether field playback or frame playback is to be
initiated when still-picture playback is performed.
Queries the setting for how the control signals are to be
output to the component connected to WARNING/REC
OUT on the rear panel terminal section when a problem has
occurred in the unit.
Queries the function of the EXT SW IN/VIDEO OUT
connector on the rear panel.
Queries the free-set timer setting.
Queries the unit's operation mode that is to be established
when the tape is inserted.