How To Set The User Default Settings - Panasonic AJ-D250P Operating Instructions Manual

Setup (Initial Settings)
3
Press the MENU-UP button or MENU-DOWN
button to position the cursor at LOAD, and
press the SET button.
The unit is set to the LOAD mode, and the LOAD
screen appears on the video monitor.
SET–UP MENU
NO
FACTORY (ALL)
FACTORY (NOT SYSTEM)
USER (ALL)
USER (NOT SYSTEM)
4
Press the MENU-UP button or MENU-DOWN
button to move the cursor to FACTORY (ALL),
and press the SET button.
O If the cursor is moved to FACTORY (NOT
SYSTEM) and this operation is performed, all
the menus except the SYSTEM menu will be
restored to the factory settings.
O If the cursor is moved to NO and this operation
is performed, operation will return to the menu
screen without restoring the factory settings.
5
Set the LOCAL/MENU/REMOTE switch to the
LOCAL or REMOTE position.
The menu setting procedure is now terminated.
How to set the user default
settings
1
Set the LOCAL/MENU/REMOTE switch to the
MENU position.
The unit is now set to the menu setting mode,
and the menu screen appears on the video
monitor.
2
2
Performs steps
perform the settings using the on-screen
menus," and change to the desired settings.
(See page 23)
<LOAD>
6
through of "How to
3
Press the RESET button.
The unit is set to the default setting mode, and
the default setting screen appears on the video
monitor.
SELECT
4
Press the MENU-UP button or MENU-DOWN
button to position the cursor at SAVE, and
press the SET button.
The unit is set to the SAVE mode, and the SAVE
screen appears on the video monitor.
SET–UP MENU
5
Press the MENU-UP button or MENU-DOWN
button to move the cursor to USER (ALL), and
press the SET button.
O If the cursor is moved to USER (NOT
SYSTEM) and this operation is performed, all
the menus except the SYSTEM menu will be
updated.
O If the cursor is moved to NO and this operation
is performed, operation will return to the menu
screen without updating the settings.
6
The screen to confirm whether SAVE is to be
initiated or canceled now appears. Press the
MENU-UP button or MENU-DOWN button to
move the cursor to the YES position, and
press the SET button.
The settings are now saved in the memory.
SAVE OK?
7
Set the LOCAL/MENU/REMOTE switch to the
LOCAL or REMOTE position.
The menu setting procedure is now terminated.
24
MODE
ESCAPE
LOAD
SAVE
PROTECT
<SAVE>
NO
USER (ALL)
USER (NOT SYSTEM)
NO
YES