Settings Using The On Screen Display - Panasonic AG-DV1000P Operating Instructions Manual

Settings Using the On Screen Display

The VTR indications shown on the monitor screen are
known as the On Screen Display (OSD).
This VTR allows many settings to be made at the OSD.
Preparation
Turn on the VTR and monitor.
STEREO AUDIO
POWER EJECT SELECT OUT
DV
IN/OUT REMOTE
LOCAL
INPUT SELECT SUPER
REC
DV S-VIDEO LINE OFF ON AUTO
INHIBIT
SUPER
OFF ON AUTO
OSD Mode
Use the SUPER switch to perform the OSD settings.
Set the OSD displays on the monitor screen which is
connected to OUTPUT1 or 2.
The OSD displays simultaneously appear or do not appear
at OUTPUT1 and 2.
AUTO: The On Screen Display will appear on the monitor
screen for a few seconds when you operate the
VTR.
ON: The On Screen Display will always appear on the
monitor screen when you perform the VTR.
OFF: The On Screen Display will not appear.
REW STOP PLAY FF PAUSE
SET
AUDIO
REC LEVEL AUDIO MIX
MENU EXIT
REC
1 2
0 10 STEREO STEREO
ZERO
DATE DISPLAY STOP RESET
To use the On Screen Display:
3 4
2 L R
A U D I O
0 : 0 9 : 4 6 : 0 0
1 2 b i t T C
1
e Audio Data Indicator
f Audio Output Mode Indicator
The Left (L) and Right (R) Indicators show which sound
mode is selected with AUDIO OUT (see page 4).
Stereo: Both the AUDIO L and R Indicators appear.
Left: The AUDIO L Indicator appears.
Right: The AUDIO R Indicator appears.
g Time code/Remaining tape time/Tape counter
Time code
Remaining tape time
Tape counter
h Tape running display
Stop
Playback
Still Playback
Fast Forward/Rewind
Cue/Review
Slow Playback
Recording/Recording Pause
i External Input Indicator
j Tape speed Indicator
k Index Indicator
Notes:
When the "SUPER" switch is set to OFF, the On Screen
Display will not appear.
On Screen Display is not displayed when the MENU
screen is displayed.
5
R E C D V
S P
I N D E X
TC 0:09:46:00
REMAIN 1:16
1:35.47
PLAYE
STILL
FFD/REWC
CUED/REVC
SLOW
RECE/REC PAU