Table of Contents
Advertisement
WARNING
Disconnect the electrical supply before servicing or cleaning the unit. Failure to
do so could result in electrical shock or personal injury from cleaner suddenly
starting.
Latches
Taquets
Lengüetas
Rear Belt
Cover
Couvre-
courroie
arrière
Cubierta de
la correa
trasera
Lower Plate
Plaque inférieure
Base inferior
Electrical Shock or Personal Injury Hazard
Removing and Installing Lower Plate
Always place paper under nozzle
whenever lower plate is removed to
protect floor.
Place handle in down position and
turn vacuum over to expose lower
plate.
Release lower plate by pressing two
(2) latches inward as shown.
Remove lower plate and remove any
residue that may exist in belt area.
Reinstall lower plate by hooking front
end of lower plate into slots on front
of nozzle housing.
Make sure all wires are routed
properly and not pinched.
Press lower plate into place then
push two (2) latches outward.
- 30 -
Advertisement
Table of Contents
