ABB AC 800F Engineering Manual page 27

Process Station
I/O bus (CAN)
Enable
Transmission
rate
I/O Bus
Redundancy
Not redundant
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
Communication link
Link module DCO01
Tele Control Library
Profibus Master
Profibus Slave
Modbus Master
Modbus Slave
Protronic / Freelance 100
Sartorius
Send
Receive
Interbus Send
Interbus Receive
This configures the usage of slot F1 in the FieldController. If a CAN module
is installed in that slot, then the CAN bus must be activated here. If any
other module is installed in slot F1, then the CAN bus must be deactivated.
Select a transmission rate of 100 or 500 Kbit/s of the station bus (default
500 Kbit/s). The transmission rate is closely linked to the distance between
two stations of one process station.
Transmission rate
500 Kbit/s
100 Kbit/s
Select the I/O protocol
Default, - I/O EPROM's capable of redundant operation must be
plugged on all I/O modules.
As of version 6.1 (AC 800F only) not supported.
ABB FieldController 800
Required no. of interface objects
1
4
2
0
2
2
1
1
1
1
1
1
Distance to last I/O unit
80m
400m
25