Grundfos Eye - Grundfos CRE Series Installation And Operating Instructions Manual

14. Grundfos Eye

The operating condition of the motor is indicated by the Grundfos
Eye on the motor control panel. See fig. 39, pos. A.
Fig. 39 Grundfos Eye
Grundfos Eye
36
A
Indication
No lights on.
Two opposite green indicator lights rotating
in the direction of rotation of the motor when
seen from the non-drive end.
Two opposite green indicator lights
permanently on.
One yellow indicator light rotating in the
direction of rotation of the motor when seen
from the non-drive end.
One yellow indicator light permanently on.
Two opposite red indicator lights flashing
simultaneously.
The green indicator light in the middle
flashes quickly four times.
The green indicator light in the middle
flashes continuously.
The green indicator light in the middle is
permanently on.
The green indicator light in the middle
flashes quickly while the R100 or Grundfos
Go Remote is exchanging data with the
motor. It will take a few seconds.
Description
Power off.
Motor not running.
Power on.
Motor running.
Power on.
Motor not running.
Warning.
Motor running.
Warning.
Motor stopped.
Alarm.
Motor stopped.
Remote control with the Grundfos GO Remote via
radio.
The motor is trying to communicate with the
Grundfos GO Remote. The motor in question is
highlighted in the Grundfos GO Remote display to
inform the user of the location of the motor.
When the motor in question is selected in the
Grundfos GO Remote menu, the green indicator
light in the middle will flash continuously. Press
on the motor control panel to allow remote
control and data exchange via the Grundfos GO
Remote.
Remote control with the Grundfos GO Remote via
radio.
The motor is communicating with the Grundfos
GO Remote via radio connection.
Remote control with the R100 or Grundfos GO
Remote via infrared light.
The motor is receiving data from the R100 or
Grundfos GO Remote via infrared communication.