Vtr (Game, Etc.) - Panasonic CY-VHD9401N Operating Instructions Manual

VTR (Game, etc.)

E
N
G
L
I
[SRC] (Source)
S
H
21
Example
VTR2 (GAME)
FULL
[SRC] (Source)
[GAME]
118
CY-VHD9401N
VTR1/VTR2 Mode
You can view the images and listen to the sounds
from the connected external devices in the VTR1
mode and VTR2 mode respectively.
Preparation:
≥ Select the same monitor system (PAL/NTSC) as
the system that is connected to VTR1 or VTR2
referring to "VTR1/2 Input Video Setting" on page
122.
Press [SRC] (Source) to change to VTR1 or VTR2
mode.
Example
(Refer to the installation instructions for
each external device connection on Electrical
Connections.)
VTR1
DVD changer
or
Camcorder
VCR
Video game
VTR2
Game position
When [GAME] is pressed, the unit
automatically adjusts the screen optimally for
video game play.
Connect the external device to VTR2. Check the OSD
to verify that the external device has been connected
to VTR2.
Every time the button is pressed:
VTR1 (GAME) VTR2 (GAME)
Caution:
≥ Stop play immediately if you start to feel unwell
in playing video games etc. on the unit's screen.
For health reasons, avoid playing video games
etc. for prolonged periods of time. After use,
be absolutely sure to disconnect it from the
product.
Indicates an operation using the
main unit only.
External Devices Connectable to VTR1/VTR2
Select the same mode (VTR1 or VTR2) as the terminal that is
DVD Changer/
connected to a DVD changer, VCR or Camcorder [VTR(1)-IN or
VCR/Camcorder
VTR(2)-IN].
Select the same mode (VTR1 or VTR2) as the terminal that is
connected to a video game [VTR(1)-IN or VTR(2)-IN].
Video Game
Note:
≥ When [GAME] is pressed, the unit automatically adjusts the
screen optimally for video game play.
Note:
≥ Depending on the features of the game software,
the screen may not be adjusted optimally for the
viewer even when this function is set to ON. In
this case, adjust the screen manually (page 120).
≥ The unit comes with a forced power OFF
switch [MAIN POWER]. By setting this switch
to the OFF position, you can forcibly turn off
the unit's power from the front seat at times
when, for instance, children on the rear seat
have nodded off to sleep while playing games.
Example where a video game is connected to VTR2
Main unit (rear)
[VTR(2)-IN] (VTR2)
Video R (red)
(Yellow)
L (white)
RCA cord (option)
Indicates an operation using the
remote control unit only.
≥ The settings for the screen adjustments
established in the game mode are stored
separately from the corresponding settings
established in the normal mode.
Video game (option)
CY-VHD9401N
E
N
G
L
I
S
H
22
119