Programme Has Started - Beko WMB 81242 LM User Manual

4.15 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases
when the water level is unsuitable.
Door Locked symbol appears when the loading door
is locked. This symbol will flash until the loading door
becomes ready to open when programme completes
or the machine is paused. Do not force to open the
loading door in this step. Symbol disappears when
the door is ready to open. You can open the door
when the symbol disappears.
4.16 Changing the selections after

programme has started

Switching the machine to pause mode
Press the Start / Pause / Cancel button to switch the
machine to pause mode. Pause symbol appears on
the display indicating that the machine is paused.
Start symbol disappears.
Changing the speed and temperature settings for
auxiliary functions
Depending on the step the programme has reached,
you may cancel or activate the auxiliary functions;
see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
Adding or taking out laundry
Press the Start / Pause / Cancel button to switch
the machine to pause mode. The programme
follow-up light of the relevant step during which
the machine was switched into the pause mode will
flash. Wait until the Loading Door can be opened.
Open the Loading Door and add or take out the
laundry. Close the Loading Door. Make changes in
auxiliary functions, temperature and speed settings
if necessary. Press Start / Pause / Cancel button to
start the machine.
C
NOTE : The loading door will not open if
the water temperature in the machine is
high or the water level is above the door
opening.
46 / EN
4.17 Child Lock
Use Child Lock function to prevent children from
tampering with the machine. Thus you can avoid any
changes in a running programme.
C
NOTE : You can switch on and off the
machine with On / Off button when the
Child Lock is active. When you switch on
the machine again, programme will resume
from where it has stopped.
To activate the Child Lock:
Press and hold 2 and 4
nd
for 3 seconds. "Con" appears on the display.
C
NOTE : Same phrase will appear on the
display if you press any button when Child
Lock is enabled.
To deactivate the Child Lock:
Press and hold 2 and 4
nd
for 3 seconds. "COFF" appears on the display.
C
NOTE : Do not forget to disable the child
lock at the end of the programme if it was
enabled before. Otherwise, machine will
not allow to select a new programme.
4.18 Cancelling the programme
Press and hold Start / Pause / Cancel button for 3
seconds. Start symbol flashes. Symbol of the step
at which the programme was cancelled remains lit.
"End" appears on the display and the programme is
cancelled.
C
NOTE : If you want to open the loading
door after you have cancelled the
programme but it is not possible to open
the loading door since the water level in
the machine is above the loading door
opening, then turn the Programme
Selection knob to Pump+Spin programme
and discharge the water in the machine.
4.19 Machine is in Rinse Hold mode
Spin symbol flashes and Pause symbol illuminates
when the machine is in Rinse Hold mode.
If you want to spin your laundry when the machine is
in this mode:
Adjust the spin speed and press Start / Pause /
Cancel button. Pause symbol disappears and Start
symbol appears. Programme resumes, discharges the
water and spins the laundry.
If you only want to drain the water without spinning:
Just press Start / Pause / Cancel button. Pause
symbol disappears. Start symbol appears. Programme
resumes and discharges the water only.
Washing Machine / User's Manual
Auxiliary Function buttons
th
Auxiliary Function buttons
th