HM-Funktechnik HM 2225 Installation And Operation Instruction Manual page 2

This instruction describes the installation and the operation of the
following HM-Funktechnik remote control systems:
professional remote control system for single drum
Release, pull, controlled brake release (deadman or intermittent
function), gear switch-over of the winch (optionally),
horn and accelerator, manual and automatic alarm
professional remote control system for single drum
Release, pull, controlled brake release (deadman or intermittent
function), gear switch-over of the winch (optionally), horn and
accelerator, manual and automatic alarm, engine start / stop
professional remote control system for single and dual
2x release, 2x pull, 2x controlled brake release (deadman or intermittent
function), gear switch-over of the winch (optionally), horn and
professional remote control system for single and dual
2x release, 2x pull, 2x controlled brake release (deadman or intermittent
function), gear switch-over of the winch (optionally), horn and
accelerator, manual and automatic alarm, engine start / stop
H M 2225
winches on forest skidders, including:
H M 2226
winches on forest skidders, including:
H M 2235
drum winches on forest skidders, including:
accelerator, manual and automatic alarm
H M 2236
drum winches on forest skidders, including:
2