1.7 Setting the Telephone According to Your Needs
To talk with a person in the monitored room
PT
Press AUTO ANS/MUTE
or go off-hook.
To cancel a monitor
PT
At the monitored telephone
Off-hook.
To stop a monitor temporarily while on-hook
PT
At the monitored telephone
Press AUTO ANS/MUTE.
•
* Enter "#31" when "Plan 2" or "Plan 3" is selected as the numbering plan through system
programming.
•
You can monitor using a PT with an AUTO ANS/MUTE button or a single line telephone
(SLT) with a MUTE button.
•
The AUTO ANS/MUTE button light shows the current status as follows:
Off: Not set
Flashing red: Set (Ready for monitoring)
84
User Manual
OR
7
3
5
Enter 735.
Press the AUTO ANS/MUTE button
to start room monitoring again.
Talk.
0
Enter 0.
Enter #.
C.Tone
On-hook.