Environmental Protection - Ryobi CRO-180 User Manual

Random orbit sander

Hide thumbs

Table Of Contents

Table of Contents

Available languages

MAINTENANCE

CLEANING THE SCRUBBING PADS

To ensure longer life and optimum performance,

periodically clean all sanding residue and foreign

materials from the scrubbing and polishing pads.

This can be done simply by rinsing the pad with warm

water until all foreign material has been washed away.

After cleaning, gently squeeze the pad to remove excess

water and allow pad to dry. Always store pads and

sanding sheets flat in a cool dry location.

CLEANING THE SANDING SHEETS

The sanding sheets that came with the sander are made

to be re-used. Therefore, it is important that they be

cleaned periodically to remove sanding residue and

foreign material that can accumulate over time. To clean

sanding sheets, rub the sheets with a hard rubber block.

You can also use the clean rubber sole of a shoe.

WARNING

Always remove the scrubbing pad or sanding

sheet from the sander before cleaning. Failure to

do so could cause serious personal injury.