Advertisement
Quick Links
OWNER'S OPERATING MANUAL
GRINDER SANDER POLISHER
SPECIFICATIONS:
• Power Input.............................................. 1500 watts
• No Load Speed ........................................ 1500 - 6500 r.p.m.
• Disc Bore Size Grinding Wheel .............. 22mm
• Disc Bore Size Sanding Pad .................. 16mm
• Spindle Thread ........................................ M13 x 2.0mm
• Weight (Machine Only) .......................... 3.9kg
This Grinder Sander Polisher is designed for light consumer use. It is NOT
designed for trade or industrial use and is not covered by warranty for use in
these applications.
THANKYOU FOR BUYING A RYOBI GRINDER SANDER POLISHER
Your new Grinder Sander Polisher has been engineered and manufactured to Ryobi's high standard for
dependability, ease of operation and operator safety. Properly cared for, it will give you years of rugged,
trouble free performance.
CAUTION: Carefully read through this entire owner's manual before using your grinder
sander polisher.
Pay close attention to the Rules for Safe Operation, Warnings and Cautions. If you use your saw properly and
only for what it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi tools.
MODEL CG180SPK
IMPORTANT NOTICE:
SAVE THIS MANUAL FOR FUTURE REFERENCE.
STANDARD ACCESSORIES:
• Carry Case
• 180mm Grinding Wheel
• 180mm Sanding Pad
• Synthetic Wool Bonnet
• Wrench
• Hex Wrench
Advertisement
Related Manuals for Ryobi CG180SPK
Summary of Contents for Ryobi CG180SPK
- Page 1 THANKYOU FOR BUYING A RYOBI GRINDER SANDER POLISHER Your new Grinder Sander Polisher has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation and operator safety. Properly cared for, it will give you years of rugged, trouble free performance.
-
Page 2: Rules For Safe Operation
For service we 17. NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal suggest you return the tool to your nearest Ryobi Authorised Service Centre for repair. When servicing, use only identical sparking of the motor could ignite fumes. - Page 3 Variable Speed Auxiliary Handle Control Lock Button Spindle Lock Start Switch Sanding Pad Grinding Wheel Synthetic Wool Bonnet Wheel Guard ■ SUPPLEMENTARY INSTRUCTIONS FOR SAFE ■ INSTALLATION OF SANDING DISC HANDLING To assemble the sanding disc, attach the sanding pad, the 1.
- Page 4 ■ INSTALLATION OF GRINDING WHEEL ■ INSTALLATION OF WOOL BONNET To assemble the grinding wheel, attach the disc flange, the To assemble the wool bonnet, attach the sanding pad by grinding wheel and the clamp nut to the spindle shaft. screwing directly on to the threaded spindle in a clockwise Be sure the disc flange is properly seated on the spindle shaft.
- Page 5 ■ SWITCH CAUTION: Never cover air vents since they • STARTING SWITCH must always be open for proper motor cooling. Your Grinder Sander Polisher starts and stops by depressing and releasing the starting switch. For continuous operation, Flat surfaces are ground at an acute angle, usually 10 to 20 press the lock button on the side of the switch while the degrees with the workpiece.
- Page 6 RYOBI NEW ZEALAND PTY. LTD. AUCKLAND: 503 Mt Wellington Highway, Mt Wellington, N.Z. Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - Email: info@ryobi.co.nz Contact during normal business hours. THIS WARRANTY FORM SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES.
Need help?
Do you have a question about the CG180SPK and is the answer not in the manual?
Questions and answers