Download  Print this page

If A Voice Processing System Is Connected - Panasonic KX-TDA15 User Manual

Hybrid ip-pbx.
Hide thumbs

Advertisement

1.9.3

If a Voice Processing System is Connected

You or an outside party can access the Voice Processing System from a telephone.
— Call Forwarding to Voice Mail (Voice Mail Integration)
If your PBX has a Panasonic Voice Processing System connected (e.g., KX-TVP/KX-TVS series)
using digital integration, the following features are also available:
— Screening Calls (Live Call Screening [LCS])
— Recording a Conversation (Two-way Record)
Call Forwarding to Voice Mail (Voice Mail Integration)
— To forward your calls to your mailbox
— To transfer a call to a mailbox
— To listen to messages
If you cannot answer calls, you can forward them to your mailbox. You can select the type of incoming
calls (Intercom Calls/Outside Calls/Both Calls). If your telephone has a Message button, the Message
light turns on and lets you know you have messages. Even if a Message button is not provided, you
will hear an indication tone* when going off-hook.
You can also transfer received outside calls to a mailbox so that calling parties can leave messages.
If you create a Voice Mail Transfer button on your phone, the transfer is done without knowing the
mailbox number (Voice Mail Transfer).
The duration for recording depends on the voice processing system.
To forward your calls to your mailbox
PT/SLT/PS
Off-hook.
voice mail floating
extension no.
Enter voice mail floating
extension number.
7
1
Enter
71.
Enter 0 to 2 as you desire.
#
C.Tone
Enter #.
1.9 Using User-supplied Equipment
0
Both Calls
OR
Outside Calls
1
OR
Intercom Calls
2
On-hook.
0
Cancel
All Calls
2
Busy
3
No Answer
4
Busy/No Answer
5
Enter required number.
For "Cancel",
For "Cancel", go on-hook
go on-hook directly.
directly after entering 0.
User Manual
119

Advertisement

Table of Contents

   Also See for Panasonic KX-TDA15

   Related Manuals for Panasonic KX-TDA15

This manual is also suitable for:

Kx-tda30Kx-tda200Kx-tda100

Comments to this Manuals

Symbols: 0
Latest comments: