Preface; Precautions - Abus TV7602 Installation Manual

Preface

Dear customer,
Thank you for purchasing this Mini Speed Motor Dome. You made the right decision in choosing
this state-of-the-art technology.
This product complies with the current standards of domestic and European regulations. The
CE has been proven and all related certifications are available from the manufacturer
(www.security-center.org) upon request.
To maintain this status and to guarantee safe operation, it is your obligation to observe these
operating instructions!
This speed dome camera is used in combination with video sources (cameras) and recording
devices (VHS or digital recorders) for the purpose of property surveillance. It enables the user to
build up a flexible and wide ranging surveillance. Due to the weatherproof housing it is the ideal
for outdoor protection. Through its adjustable rotation speed, 360° endless rotation, 180° tilt
angle and 165 preset positions the camera offers an easy setup and a comfortable usage.

Precautions

To reduce the risk of electric shock, do not remove cover (or back) – there are no user
serviceable parts inside. Refer servicing to qualified service personnel.
If the camera becomes wet, turn the power off immediately and ask a qualified service
technician to check it before turning the power on again.
Never point the camera towards the sun. Whether the camera is in use or not, never aim the
CCD at the sun or other very bright objects (laser light). This can damage the CCD element and
create white dots on the monitor, a sign that CCD pixels are destroyed.
Operate the camera only within the specified temperature, humidity and power ranges.
Operating the camera outside the prescribed ranges can lead to reduced product life and early
malfunction. Greatly exceeding the specified operating ranges can also result in immediate
failure of the camera. All specifications can be found in the technical data. Observe the correct
camera model.
Handle the camera with care. Do not abuse the camera. Avoid striking, shaking, etc. Mount the
camera in a shake-free area. The camera could be damaged by improper handling, storage or
transport.
© Security-Center GmbH & Co. KG, September 2007
Every effort has been made to ensure that the contents of this manual are correct. However, neither the authors nor
Security-Center GmbH & Co. KG accept any liability for loss or damage caused or alleged to be caused directly or
indirectly by this manual. The contents of this manual are subject to change without notice.
38