Panasonic KX-TD1232 Installation Manual page 57

Paralleled Telephone Connection
Any single line telephone can be connected in parallel with a proprietary telephone as follows:
Method 1: Using a Modular T-Adaptor
Any single line telephone can be connected in parallel with a proprietary telephone as follows:
Modular T-Adaptor
(Panasonic KX-J66 or USOC RJA2X)
4-conductor wiring cord
For DPT: Connect pins "D1" and "D2"
only. ("T" and "R" are not necessary.)
For APT: Connect pins "T2", "R", "D1"
and "D2".
Note
• The KX-TD1232 is illustrated as the main unit.
• The 6-conductor wiring cord (and the Modular T Adaptor KX-J36) is required if the
proprietary telephone KX-T7130 is to be used for parallel connection for KX-TD1232.
Installation Manual
Digital or Analog
Proprietary Telephone
General Installation
2-conductor wiring cord
Connect pins "T" and "R".
Single Line Telephone
57