Panasonic KX-TD1232 Installation Manual page 11

F.C.C REQUIREMENTS AND RELEVANT
INFORMATION
1.
Notification to the Telephone Company
This equipment complies with Part 68 of the FCC rules and the requirements adopted by
the ACTA. On the bottom of this equipment is a label that contains, among other
information, a product identifier in the format US: XXXXX##XXXXX. If requested, this
number must be provided to the telephone company.
Installation must be performed by a qualified professional installer. If required, provide the
telephone company with the following technical information:
• Telephone numbers to which the system will be connected
• Make: Panasonic
• Model: KX-TD816 / KX-TD1232
• FCC Registration No.: found on the bottom of the unit
• Ringer Equivalence No.: 0.4B
• Facility Interface Code: 02LS2, 02RV2-T, 02IS5
• Service Order Code: 9.0F, AS.2, 6.0P
• Required Network Interface Jack: RJ11 / 14C, RJ49
2.
Ringer Equivalence Number (REN)
The REN is used to determine the number of devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result in the devices not ringing in response
to an incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as determined by
the total RENs, contact the local telephone company. The REN for this product is part of
the product identifier that has the format US: XXXXX##XXXXX. The digits represented
by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products,
the REN is separately shown on the label.
3.
Incidence of Harm to the Telephone Lines
If this equipment causes harm to the telephone network, the telephone company will notify
you in advance that temporary discontinuance of service may be required. But if advance
notice isn't practical, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC if you believe it is
necessary.
4.
Changes in Telephone Company Communications Facilities, Equipment, Operations
and Procedures
The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
Installation Manual
F.C.C REQUIREMENTS AND RELEVANT INFORMATION
11