Mode Overview; Using The Crown - Casio 5455 Operation Manual

Mode Overview

Timekeeping Mode
The main hour, minute, and second hands
indicate the current time.
The small hour and minute hands indicate the
current World Time.
Current location time/
World Time swapping
① (Hold down about
3 seconds.)
④
Airplane Mode
(Hold down about
⑤ ⑥ ③
4 seconds.)
A Current day of the week
B Current location time (24-hour time)
C Current location date
D World Time hour (24-hour time)
E World Time hour
F World Time minute
Stopwatch Mode
The main hour and minute hands indicate the
current time.
The second hand, and the small hour and
minute hands indicate the elapsed stopwatch
time.
①
④
Airplane Mode
(Hold down about
③ ②
4 seconds.)
A Stopwatch seconds
B Stopwatch minutes
C Stopwatch hours
D Stopwatch hours (24-hour time)
E Current location time (24-hour time)
Operation Guide 5455
Timer Mode
The main hour and minute hands indicate the
current time.
The second hand, and the small hour and
minute hands indicate the current countdown
time.
Airplane Mode
(Hold down about
②
4 seconds.)
A Timer seconds
B Timer minutes
C Timer hours
D Timer hours (24-hour time)
E Current location time (24-hour time)
Alarm Mode
The main hour and minute hands indicate the
current time.
The small hour and minute hands indicate the
alarm time.
The second hand indicates the alarm enabled/
disabled setting.
Start/
Stop
Airplane Mode
(Hold down about
4 seconds.)
⑤
Reset
A Alarm enabled/disabled
B Alarm minute
C Alarm hour
D Alarm hour (24-hour time)
E Current location time (24-hour time)
①
Start/
Stop
⑤
④
Reset
③ ②
①
⑤
④
Enabling/
Disabling the Alarm
③ ②

Using the Crown

The crown is a simple lock type.
Before using the crown, first unlock it.
As shown in the illustration, rotating the crown
to the u position unlocks it.
As shown in the illustration, rotating the crown
to the t position locks it.
Important!
To prevent loss of water resistance
●
and/or damage due to impact, be
sure to push the crown in and lock it
when not in use.
When pushing the crown back in,
●
take care not to apply too much
force.
Fast Forward/Fast Reverse
●
First click
Second click
Normal position Crown
After pulling out the crown to the first or second
click, rotating it quickly in succession in either
direction will start a fast forward or fast reverse
operation. While a fast forward operation is in
progress, quickly rotating the crown in
succession again will increase the speed even
further.
The fast reverse operation speed is fixed
●
and cannot be changed.
Stopping Fast Forward/Fast Reverse
●
Rotate the crown in the direction opposite that
of the ongoing operation or press any button.
Note
If you do not perform any operation
●
for about two minutes after pulling
out the crown, crown operations will
automatically become disabled. If
that happens, push the crown back
in and then pull it out again.
2