Table of Contents
Advertisement
• Never operate appliance with open lid.
• Only use the kettle for heating water!
• The kettle can only be used with the stand provided.
• The mains cable or anything else must do not touch the power switch.
Failure to do so could result in the auto shut off function not to work correctly
and therefore in a risk of overheating or fire.
• While water boiling, avoid contacting with steam from the spout when water
is boiling or just after it has switched off. Do not be anxious to uncover the
lid.
• The heating element surface is subject to residual heat after use.
• The mains cable must not come into contact with any hot parts of the
appliance.
• Do not put water into the appliance when it is hot!
• WARNING: Do not remove the lid while the water is boiling.
• CAUTION: Position the lid so that steam is directed away from the handle.
• Caution: If the kettle is overfilled, boiling water may be ejected.
This appliances is intended to be used in household and similar applications
such as:
- staff kitchen areas in shops, offices and others working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
GETTING STARTED
1. Before first use, wipe the inside and outside of the kettle with a damp cloth.
2. Place the base unit on a firm and flat surface. Plug the mains plug into a wall socket.
Redundant cord can be wound into the bottom of base unit.
3. Press the button to open the lid, pour water into the kettle. Make sure water level
is visible in the water level indicator, but not exceeding the Max. mark.
4. Close the lid and make sure it snaps in correctly. Otherwise the auto switch off function will not
work reliably. Place the kettle onto the base. Press down the ON/OFF switch; the indicator light will
illuminate and the kettle will start to heat up.
5. The automatic switch off function. When the water has boiled or the kettle is moved from the base, it
will switch off automatically. If you wish to stop the heating process before the water is boiling, simply
lift up the ON/OFF switch to the OFF position.
CLEANING AND CARE
6. Before cleaning, always unplug the appliance. Never rinse or immerse the kettle or base unit in water.
Just wipe with a damp cloth, using no abrasive detergents. Occasionally rinse out the kettle with clean
water.
7. To clean the mesh filter, grab the strainer insert and lift out. Cleaning the heating plate – superficial
spots of rust may appear on the base unit. Remove with a stainless steel cleaning agent.
8. Decalcifying is recommended regularly, depending on water hardness. Fill the kettle with water and
decalcifier according to decalcifier product instructions. Do not boil the solution as it may foam over.
Afterwards, rinse kettle thorougly with fresh water.
www.electrolux.com
GB
KO
ZH
ZH
VI
TH
JA
IN
5
Advertisement
Table of Contents
