Setting Jitter Receive Interface - HP 37717C User Manual

Setting the Interfaces

Setting Jitter Receive Interface

Setting Jitter Receive Interface
Description: PDH Jitter and PDH error measurements are made simultaneously
when a PDH jitter measurement Option is fitted. The measurements are
made on the normal input to the PDH receiver and the interface
selections are the normal PDH Receiver selections. The jitter receive
interface is selected with
SDH/SONET Jitter and SDH/SONET error measurements are isolated
individual measurements. The SDH/SONET jitter measurement is made
on an SDH/SONET input to the Jitter module and there is a specific
receive interface displayed with
The choices made on the jitter receive interface determine the jitter
measurement range, the threshold level for determining a jitter hit and
which filters are used in the jitter measurement.
HOW TO: 1 Choose the RECEIVER RANGE - the jitter measurement range.
2 Choose the HIT THRESHOLD level - if the received jitter exceeds the
value chosen a jitter hit is recorded.
3 Choose the FILTER you wish to include in the peak to peak and RMS
jitter measurement.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
JITTER.
PDH
RECEIVE
SDH /SONET JIT
RECEIVE
.
23