System Info; Factory Reset - Onkyo R-N855 Instruction Manual

and press ENTER (d).
■ LINE OUT/SW
Change the settings according to the devices connected
to the LINE OUT jacks on this unit. When changing this
setting, perform without devices connected to the LINE
OUT jacks.
Select the item with / (c) on the remote controller
and press ENTER (d).
"LINE OUT" (Default Value) : When connecting recording
devices, such as a cassette tape deck
"SW PREOUT" : When connecting a subwoofer with
built-in power amplifier

System Info

The MAC address of this unit and the current firmware
version will be displayed.
Select "MAC address" or "Firmware" with / (a) on the
remote controller.

Factory Reset

Reset the settings of this unit to the status at the time of
shipment. We recommend that you take a note of the
settings you have changed before going ahead with a
factory reset. To reset, select "Reset Start" with / (a)
on the remote controller and press ENTER (d). Press
ENTER (d) again to start the reset. The unit will be
placed on standby automatically when initializing is
completed.
Update
"Update" is not displayed if there are no firmware
updates.
■ via Network
Press ENTER (d) to select when you want to update the
firmware via network.
■ via USB
Press ENTER (d) to select when you want to update the
firmware via USB.
31
En-