Configuring Home City Settings; Timekeeping - Casio 5478 Operation Manual

Operation Guide 5478
Selecting a Mode
In the Timekeeping Mode, press E to enter the Stopwatch Mode.
For more information about using the Stopwatch Mode, see "To enter the
Stopwatch Mode" (page E-26).
Timekeeping Mode
E
C
E-10
Timekeeping Mode
E-12
General Functions (All Modes)
The functions and operations described in this section can be used in all modes.
Moving the Hands Out of the Way for Better Viewing
You can use the procedure below to temporarily move the hour and minute hands
out of the way to better view what is on the display.
This operation can be performed in any mode. In the case of a setting mode
(setting flashing on the screen), the hands will move out of the way automatically,
even if you do not perform the below operation.
E-14
2. Holding down B again as you press C will cause the hands to return to their
normal positions (normal timekeeping).
Note
Watch button functions are the same regardless of whether the hands are moved
out of the way or at their normal positions.
Changing to another mode will cause the hands to move back to their normal
positions.
The hands also will move back to their normal positions automatically if no
operation is performed for about one hour.
Auto Return
If you do not perform any operation for about two or three minutes while
configuring settings (setting flashing on the digital display) in any mode, the watch
will exit the setting operation and return to normal display.
E-16

Configuring Home City Settings

There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To configure Home City settings
1. In the Timekeeping Mode, hold down A until the
City Code
flashing SET Hold indicator disappears from the
display and the currently selected city code flashes on
the display.
This indicates the Home City setting mode.
2. Use D (+) and B (–) to scroll through city codes until
the one you want is displayed.
For details about city codes, see the "City Code
Table" at the back of this manual.
Holding down either button scrolls at high speed.
E-18
Stopwatch Mode
Countdown Timer Mode
C
C
Press C to cycle between the modes as shown below.
To return to the Timekeeping Mode from any other mode, hold down C for about
two seconds.
In any mode (except a setting mode), press B to illuminate the display.
The dial hand indicates the mode (Timekeeping Mode:
When you enter the Timer Mode (TR) or Stopwatch Mode (ST), the dial hand first
indicates TR or ST, and then moves to the position shown below.
World Time Mode Alarm Mode
C
1. While holding down B, press C.
This will cause the hour and minute hands to move to a location where they do
not block your view of the digital display.
Example: When the current time is 8:23
Flashes while the hands are moved out of the way.

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.
Day of week Month-Day
Hour
Second
Minute
Dial hand
3. After the setting is the way you want, press A to return to the Timekeeping
Mode.
Note
You can check the city code and name (English) of your Home City by pressing A.
After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
* Coordinated Universal Time, the world-wide scientific standard of timekeeping.
The reference point for UTC is Greenwich, England.
E-11
).
Stopwatch Mode
C
C
E-13
E-15
PM indicator
D
Second
Hour : Minute
E-17
E-19