Panasonic DMC-G6 Owner's Manual For Advanced Features page 344

Others
The picture is not displayed fully on the TV.
> Check [TV Aspect] setting.
VIERA Link does not work.
•
Is it connected properly with the HDMI mini cable (optional)?
> Confirm that the HDMI mini cable (optional) is firmly fitted.
> Press [(] on this unit.
•
Is the [VIERA Link] on this unit set to [ON]?
> Depending on HDMI terminal of the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch input. (For details on how to switch
input, please read the operating instructions for the TV.)
> Check the VIERA Link setting on the connected device.
> Turn this unit off and on.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to [On]. (Refer to the operating
instructions of the TV for details.)
Cannot communicate with the PC.
•
Is the camera connected to the PC correctly?
•
Is the camera recognized by the PC correctly?
> Set to [PC] in [USB Mode]. (P59,
> Turn this unit off and on.
The card is not recognized by the PC.
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
> If there are two or more USB terminal on a single PC, try connecting the USB connection
cable to another USB terminal.
The card is not recognized by the PC. (SDXC memory card is used.)
> Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not
format.
> If the [Access] displayed on the monitor does not disappear, disconnect the USB
connection cable after turning this unit off.
Downloaded from www.Manualslib.com
(P60)
manuals search engine
(P61)
301)
344
(P294)