Recording
4
Canceling the Burst Mode
∫
Select [
(P178)
Focusing in Burst Mode
The focus changes depending on the setting for [Focus/Release Priority]
[Custom] menu and the setting for [Focus Mode]
Focus Mode
¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first
picture.
¢2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢3 Burst speed takes priority, and focus is estimated within possible range.
Downloaded from
www.Manualslib.com
•
The Burst speed may become slower depending on the following settings.
–
[Picture Size] (P188)/[Quality] (P189)/[Sensitivity] (P154)/[Focus Mode] (P162)/
[Focus/Release Priority]
•
Burst speed can also be set with [Burst Rate] in the [Rec] menu.
•
Refer to
P189
for information about RAW files.
Focus on the subject and take a picture.
•
Hold down the shutter button fully to activate the Burst
Mode.
] (single picture recording) or [
AFS
AFF/AFC
¢1
MF
manuals search engine
(P170)
(P162)
Focus/Release
Priority
[FOCUS]
[RELEASE]
[FOCUS]
[RELEASE]
—
180
4:3
L
60 i
] from among the drive modes.
in the [Rec] menu.
Focus
At the first picture
Normal focusing
Predicted focusing
Focus set with Manual Focus
AFS
AFS
H
(P170)
in the
¢2
¢3