Accessories And Options; Disposal And Environmental Protection - walimex power shooter 600 Instruction Manual

Part of the
device
Housing
Modeling bulb,
flash tube
Reflector
13.3 Change micro-fuse
WARNING
Danger of electric shock and fire through short-circuit
A micro-fuse, which is not conform with the required specifications, doesn´t
protect against the overloading of the device. Please just use a micro-fuse,
which is conform with the required specifications. See Technical Specifications.
1. Switch off device.
See Switch the device on and off.
2. Disconnect from power supply:
Disconnect the power supply unit from the electric power supply.
3. Use a small screwdriver to pull the fuse out of the fuse holder of the battery.
4. Slide the fuse holder carefully into the slot as far as it goes.

14. Accessories and options

You find optimal accessories for your device at our website.

15. Disposal and environmental protection

Please dispose of your device at your local disposal area at no charge.
Cleaning
Use a microfiber cloth to remove light and stubborn dirt.
Wipe off with dust brush or dry, soft cloth
Remove dirt with
microfiber cloth
43