Connect To Power Supply - walimex power shooter 600 Instruction Manual

Demount reflector:
• Push back unlocking lever and keep pressed.
• Turn the reflector anticlockwise as far as it will go and take off from the
device.
Mount on tripod (optional)
1 Tripod Mount
2 Locking Knurl
1. Open locking knurl.
2. Mount the device on the tripod.
3. Tighten locking knurl.

7. Connect to power supply

• Connecting socket for flashes
• Protection cap for socket
• Locking ring
• Switch off device.
See Switch the device on and off.
• Screw on the locking ring
• Remove the protection caps.
• Plug the flash connecting cable into the socket and close the locking ring.
38
2 1