Preparing The Devices For Use - walimex power shooter 600 Instruction Manual

6. Preparing the devices for use

6.1. Charge the powerpack
WARNING
Strictly follow all notes on safety in these instructions for use.
• Powerpack
• Accumulator
• Battery charger
Remove the powerpack
• Press the unlocking feature on the
left and right hand sides of the
powerpack.
• Pull the Power Pack up and off
the powerpack.
Fastening the powerpack
• Stand the Battery Pack on the powerpack. Make sure that the guide points
on Battery Pack and powerpack do match.
• Press the Battery Pack from above on to the powerpack, until the unlo-
cking feature clicks into place.
• Connect your power supply unit to the mains supply and plug the adapter
into the socket on the battery charger.
NOTE
Compare the local electric power supply with the connection values of the
device. Should the connection values not match, please contact
info@foto-walser.de or phone +49 (8432) 8432-948994890.
36