Table of Contents Model CE-CN-0025-FN / Model CE-CN-0025-FP / Model CE-CN-0023-FP Model CE-CN-0023-FN / Model CE-CN-0037-FN / Model CE-CN-0037-FP Section Page General Information --------------------------------------------------------------------------- 3 - 4 Safety and Warranty --------------------------------------------------------------------------- 4 - 5 Technical Specifications ---------------------------------------------------------------------- 5 - 6 Installation --------------------------------------------------------------------------------------- 6 - 7 Assembly...
If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents.
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any appliance. 1 YEAR PARTS AND LABOUR WARRANTY Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized service technician to repair the equipment locally.
Technical Specifications CONSTRUCTION • Welded 16 gauge stainless steel tank with a super smooth machine finish ensures easy cleaning. • Long lasting baffles are mounted in the heat exchange tubes to provide maximum heating and combustion efficiency. • Standing pilot light design provides a ready flame when heat is required. •...
Installation • 6” from back of fryer. Between the fryer and any open-top flame units: • 16” (41 cm). • Install fryer in an area with sufficient air supply for gas combustion at fryer burners. • Do not obstruct the flow of combustion and ventilation air. •...
Page 8
Assembly • Turn gas supply valve OFF. 2. Reconfigure Pressure Regulator • Remove converter cap and pin from pressure regulator. • Carefully remove pin from cap. • Invert pin and reinstall in cap. • Be sure gasket is in place on cap, then securely reinstall cap and pin on pressure regulator. 3.
Assembly GAS PRESSURES (ALL MODELS) The gas pressure should be set at 5” W.C. (Water Column) (1.25 kPa) of pressure for natural gas and 10” W.C. (2.54kPa) of pressure for propane gas. If incoming pressure exceeds ½ PSI (3.5 kPa), an additional pressure regulator must be installed.
Page 10
Operation To Fill Tank with Shortening: • Solid shortening should NOT be used with fryers. • Melting solid shortening will damage the tank and void your warranty. 1. Close the drain valve. 2. Fill the fryer tank with liquid shortening. 3.
Page 11
Operation 4. Add fresh shortening as needed. Guidelines for Fry Baskets • Do not overfill baskets. • Carefully lower basket into oil. • When frying doughnuts and fritters, turn product only once during frying. • When cooking French fries or onion rings, shake the basket several times carefully, as not to splatter oil. •...
Maintenance • Hot oil and hot parts can cause burns. • Use care when operating, cleaning, and servicing the fryer. • Spilling hot fryer compound can cause severe burns. • Do not move fryer without draining all frying compound from the tank. •...
Maintenance FLUE VENT INSPECTION • When the fryer is cool, inspect annually. Check the flue and clear any obstructions. Service in the US and Canada Contact your local Service office or address on the front of this manual. Troubleshooting Problem Cause No heat Thermostat dial is not turned on.
Parts Breakdown Model CE-CN-0023-FN 36490 Model CE-CN-0023-FP 36489 Model CE-CN-0025-FN 36486 Model CE-CN-0025-FP 36485 Model CE-CN-0037-FN 36488 Model CE-CN-0037-FP 36487...
Page 15
Parts Breakdown Model CE-CN-0023-FN 36490 Item No. Description Position Item No. Description Position Item No. Description Position 74862 Tube Screen Grate for OGF-90/NG 74880 Oil Drain Valve for OGF-90/NG 74898 Burner Middle for OGF-90/NG 30-2 74863 Fire Damper Plate for OGF-90/NG 74881 Oil Drain Extension Pipe for OGF-90/NG 74899...
Page 16
Parts Breakdown Model CE-CN-0023-FP 36489 Item No. Description Position Item No. Description Position Item No. Description Position 74916 Tube Screen Grate for OGF-90/LPG 74934 Oil Drain Valve for OGF-90/LPG 74952 Burner Middle for OGF-90/LPG 30-2 74917 Fire Damper Plate for OGF-90/LPG 74935 Oil Drain Extension Pipe for OGF-90/LPG 74953...
Page 17
Parts Breakdown Model CE-CN-0025-FN 36486 Item No. Description Position Item No. Description Position Item No. Description Position 74970 Tube Screen Grate for OGF-120/NG 74988 Oil Drain Valve for OGF-120/NG 75006 Burner Middle for OGF-120/NG 30-2 74971 Fire Damper Plate for OGF-120/NG 74989 Oil Drain Extension Pipe for OGF-120/NG 75007...
Page 18
Parts Breakdown Model CE-CN-0025-FP 36485 Item No. Description Position Item No. Description Position Item No. Description Position 75023 Tube Screen Grate for OGF-120/LPG 75041 Oil Drain Valve for OGF-120/LPG 75059 Burner Middle for OGF-120/LPG 30-2 Oil Drain Extension Pipe for OGF-120/ 75024 Fire Damper Plate for OGF-120/LPG 75042...
Page 19
Parts Breakdown Model CE-CN-0037-FN 36488 Item No. Description Position Item No. Description Position Item No. Description Position 75077 Tube Screen Grate for BDGF-150/NG 75095 Oil Drain Valve for BDGF-150/NG 75113 Burner Middle for BDGF-150/NG 30-2 Oil Drain Extension Pipe for BDGF-150/ 75078 Fire Damper Plate for BDGF-150/NG 75096...
Page 20
Parts Breakdown Model CE-CN-0037-FP 36487 Item No. Description Position Item No. Description Position Item No. Description Position 75131 Tube Screen Grate for OGF-150/LPG 75149 Oil Drain Valve for OGF-150/LPG 75167 Burner Middle for OGF-150/LPG 30-2 Oil Drain Extension Pipe for OGF-150/ 75132 Fire Damper Plate for OGF-150/LPG 75150...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté...
Page 24
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Need help?
Do you have a question about the CE-0025-FN and is the answer not in the manual?
Questions and answers