Studiologic SL-2001 User Manual page 39

English
PERFORM /
PrstChg Source
Off Kybd2
csl 1 csl 2 csl 3
Control Slider 1 is used to enable SL-2001 preset changes via MIDI program change commands. Slider 3 is used to select the
device from which the SL-2001 will accept program change commands. Program changes from all input devices will be
accepted by selecting All on Slider 3.
The Conditional Preset Change function allows the SL-2001 preset change to be delayed if there are currently notes held (or
if the sustain pedal is pressed) on the keyboard. The conditional function may also be used with external keyboards. As
soon as the notes (and pedal) are released, the SL-2001 will change to the selected preset. The Conditional Preset Change
function applies to the front-panel PRESET switches as well as a preset-change command from any source (MIDI IN A through
D, Inc/Dec). During the time that the preset change is delayed, the Preset digits will flash until the conditions are met. If
desired, the conditional program change may be forced by using the All-Notes-Off function (press the Edit and Store switch-
es simultaneously).
7
PRESET FUNCTIONS
The Preset Functions have a different value for each SL-2001 preset. After any Preset-programmable function is edited, the
Store function must be used to save the changes in the preset. Enter Edit Mode and press FUNCTION switch 3 until the
desired screen appears. The Preset digits will be displayed to indicate the location being edited.
PRESET
Every preset on the SL-2001 may be designated by a 10-character name. This name appears on the text display during
Perform Mode. The Preset screen is used to enter the desired name.
74
I N S T R U C T I
M I D I C O N T R O L L E
EDIT
csl 4 PRESET ZONE
O N S M A N U A
®
R S
Upon entering this screen, a flashing character will indicate the current position of the cursor. Use Control Slider 1 to select
the desired character for this position, or press the appropriate key on the SL-2001 keyboard.. To change the position of the
cursor, use the left and right arrow switches ( < > ).
Each SL-2001 preset also includes a programmable text line which is used to indicate the function of the control sliders dur-
ing Perform Mode. There are twenty-four characters available on the bottom line of the display for this purpose. If desired,
this text line may be alternately used for any general notes or information concerning the preset (for example, to identify the
function of the footswitches). Use the Star switch to access the alternate screen. The text is entered using Control Slider 1
and the left and right arrow (
AUX PROG
During the Device Installation procedure (section 4) up to eight devices may be designated as Auxiliary devices. An Auxiliary
device is any MIDI device that does not require note or controller information, only program change messages (for example,
a reverb unit, programmable EQ, or a MIDI lighting controller). The Auxiliary Program function is used to issue program
change commands while leaving the zones free for controlling sound modules.
L I N S
English
PERFORM / EDIT
Char Preset Name <Crsr>
Blank Prst
csl 1 csl 2 csl 3 csl 4 PRESET
) switches.
PERFORM / EDIT
Revrb Mixer Lites EQ
A 5 1 58 7
csl 1 csl 2 csl 3 csl 4 PRESET
T R U C T I O N S
®
M I D I C O N T R O L L E R S
ZONE
ZONE
75
M A N U A L