Selecting The Playback Source; Selecting The Source From The Start Menu - Panasonic SC-PT464 Operating Instructions Manual

Presetting stations manually
Up to 30 stations can be set.
1 While listening to the radio broadcast
Press [OK].
2 While the frequency is flashing on the display
Press the numbered buttons to select a channel.
≥ To select a 2-digit number
e.g. 12: [S10] [1] [2]
Alternatively, press [X, W], and then press [OK].
Main unit:
1 While listening to the radio broadcast
Press [MEMORY] twice.
2 While a channel number is flashing on the display
Press [X TUNE W], and then press [MEMORY].
A station previously stored is overwritten when another station is stored in
the same channel preset.

Selecting the playback source

Selecting the source from the START menu

You can select desired source or access playback/menus by using the
START menu.
1
2
OK
START
OK
OK
Show the START
menu.
This unit automatically turns on.
(The TV also turns on when using
VIERA Link "HDAVI Control". This
works only when in "DVD/CD" or
"IPOD" mode without any disc/
device being loaded/connected.)
e.g.
DVD/CD Home theater
Input select
OK
RETURN
Select an item.
≥ To exit, press [START].
FM frequency step
The step is factory-set to 0.2-MHz, but you can change it to receive
broadcasts allocated in 0.1-MHz steps. You may need to change this
setting if the tuner seems to skip over the correct frequency for stations in
your area.
Press and hold [FUNCTIONS].
After a few seconds, the display changes to show the current minimum
frequency. Continue to hold the button down. The minimum frequency
changes and the step is changed.
e.g. 87.9 (Factory preset) ,# 87.5
To return to the original step, repeat the above step.
[Note]
After changing the setting, previously preset frequencies will be cleared.
Preset them again.
When "Input select" is selected
You can select a desired source from the menu.
≥ DVD/CD ( 9), FM ( 10), AUX
iPod ( 22)
"(TV)" will appear beside "AUX" or "DIGITAL IN", indicating the TV
§
audio setting for VIERA Link "HDAVI Control" (
When a disc is loaded, you can also access playback or menus from the
START menu.
e.g. [DVD-V]
DVD/CD
Playback Disc
TOP MENU (DVD)
MENU (DVD)
Input select
OK
RETURN
When the on-screen control panel appears
e.g. [DVD-V] (when "Playback Disc" is selected from the START menu)
You can operate the playback with the indicated controls.
( 12), DIGITAL IN ( 12),
§ §
20).
Home theater
Playback/menu access
(Continued on next page)
11