Selecting Sound Mode; Whisper-Mode Surround; Adjusting The Speaker Output Level Manually - Panasonic SC-PT464 Operating Instructions Manual

Selecting sound mode

1
Select a sound mode.
SOUND
Each time you press the button:
EQ:
SUBW LVL:
C.FOCUS:
2
While the selected Make settings.
mode is displayed
Refer to the following for setting details of
each sound effect.
Equalizer
You can select sound quality settings.
Each time you press [2, 1]:
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT: For background music.
FLAT: Cancel (no effect is added).
Subwoofer level
You can adjust the amount of bass. The unit automatically
selects the most suitable setting according to the type of
playback source.
SUB W 1 ,# SUB W 2 ,# SUB W 3 ,# SUB W 4
^-------------------------------------------------------------------J
≥ The setting you make is retained and recalled every time you
play the same type of source.
Center Focus
(Effective when playing audio containing center channel
sound or when "ÎPLII" lights in the main unit display.)
You can make the sound of the center speaker seem like it is
coming from within the TV.
C.FOCUS ON,------.C.FOCUS OFF

Whisper-mode Surround

You can enhance the surround effect for low volume 5.1-channel sound.
(Convenient for late night viewing.)
≥ "(( ))" lights when there is effect.
W.SRD
Each time you press the button:
WHISPER-MODE SRD ON
WHISPER-MODE SRD OFF
Equalizer
Subwoofer Level
Center Focus

Adjusting the speaker output level manually

Preparation
≥ To display the picture, turn on the TV and select the appropriate video
input mode.
≥ Press [r, s VOL] to adjust the volume to normal listening level.
≥ Select "TEST TONE" from "SPEAKER SETTINGS" in AUDIO menu
( 25).
1
Enter test tone mode.
OK
e.g.
Test tone will be output to each channel in the
following order.
LEFT, CENTER, RIGHT,
SURROUND RIGHT, SURROUND LEFT
2
Adjust the speaker level for each
speaker. (CENTER, SURROUND
OK
RIGHT, SURROUND LEFT)
`6 dB to i6 dB (Factory preset: 0 dB)
≥ To exit the screen, press [SETUP].
To adjust speaker level during play
(Effective when playing 5.1-channel sound or when "ÎPLII" lights.)
1 Press and hold [—CH SELECT] to select the speaker.
While the speaker channel is displayed, press [—CH SELECT].
L# C# R# RS# LS# SW
^------------------------------------------}
≥ You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel and "ÎPLII" is not lit.
≥ "S" appears on the main unit's display when you have selected
"S.SRND" ( 12, Enjoying surround sound effects). In this case,
you can adjust both surround speaker levels at the same time using
[3, 4].
S: `6 dB to i6 dB
2 Press [3] (increase) or [4] (decrease) to adjust the speaker level
for each speaker.
C, RS, LS, SW: `6 dB to i6 dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers, while "L" or "R" is selected,
press [2, 1].
AUDIO-SPEAKER SETTINGS-TEST TONE
SPEAKER TRIM LEVEL
LEFT − −
CENTER 0dB
RIGHT − −
SURROUND RIGHT 0dB
SURROUND LEFT 0dB
SET
RETURN EXIT : SETUP
13