Epson PLQ-30 User Manual page 65

When using the printer driver, change the settings on the printer driver. For details, see "Printer
Driver Settings Overview" on page 29.
Thai compose mode (CP874 only)
This setting allows you to select how Thai character is processed. The default setting is
Non-compose.
Thai 1 pass mode (CP874 only)
This setting allows you to select how Thai character is printed. The default setting is Multi-pass.
Auto line feed
When auto line feed is set to On, the printer accompanies each carriage return (CR) code received with
a line feed (LF) code.
Auto CR
When auto carriage return is set to On, each line feed (LF) code or ESC J code is accompanied by a
carriage return (CR) code so the printer moves the next printing start position to the left margin.
When this setting is set to Off, you must send a CR code after the line feed code to move the printing
start position to the left margin.
Columns
You can select the number of columns in one line.
Serial communication interface
This setting allows you to select enabling or disabling of Financial Protocol function, as well as to select
reply control method when Financial Protocol is enabled. By selecting reply control method, a
handshake that matches the host PC environment is allowed.
Selecting the Without Finance Device Driver disables Financial Protocol function. Selecting other
settings enables Financial Protocol setting, as well as allowing you to select reply control method.
EPSON Mode Settings
Menu
Software
Interface
Auto I/F wait time (Seconds)
Print direction
Values (default in bold)
ESC/P2, IBM PPDS, ESC/P2+ESC/MC
Auto, Serial, Parallel, USB
10, 30
Bi-D, Uni-D, Auto
PLQ-30/PLQ-30M User's Guide
Control Panel 65