Epson PLQ-30 User Manual page 61

PLQ-30/PLQ-30M User's Guide
Character table
You can set one of the three character tables; Olivetti, PC, ISO.
Olivetti character table
You can select a font. The setting you select in this table is effective only when you have chosen
Olivetti in the Character table setting.
PC character table
You can select a font. The setting you select in this table is effective only when you have chosen PC in
the Character table setting.
ISO character table
You can select a font. The setting you select in this table is effective only when you have chosen ISO in
the Character table setting.
8-pin bit image resolution
You can select 72 or 96 as the default value of the 8 pin bit image resolution.
Serial I/F DSR
When you select On, DSR (Data Set Ready) is activated.
This option is available only in the PR2 mode.
Serial I/F DCD
When you select On, DCD (Data Carrier Detector) is activated.
This option is available only in the PR2 mode.
Status Request
This setting allows you to set the reply timing for the status response command. When No Wait is
selected, the command is processed without waiting for the printing operation. When Wait is
selected, the command is processed after the printing operation has completely finished.
Condensed pitch (cpi)
You can set the pitch that is used in the condensed mode.
Vertical resolution
This setting allows you to select the vertical resolution.
Control Panel 61