Using The Battery; Charging The Battery Pack; If You Do Not Have An External Battery Charger - XPLORE TECHNOLOGIES iX104 User Handbook Manual

Chapter 2. Using the iX104

Using the battery

Using the battery
56
You can recharge, remove, and replace the battery pack.

Charging the battery pack

If you do not have an external battery charger

Follow these steps to charge the battery while it is installed in the
computer:
1. Connect a power source, such as an AC adapter or cigarette
lighter adapter, to the power connector on the computer.
power
connector
If the battery charge is below 90%, the battery begins charging
and the Status LED flashes green. (If the battery charge is higher
than 90%, the battery will not charge, preventing battery
overcharge.)
iX104 User's Handbook